Eagle E-DVR-104 Instrukcja Obsługi

User’s Manual 2 Your DVR can be set up for event or time-lapse recording. You can define times to record, and the schedule can change for different

4- & 8-Channel Digital Video Recorder 3Chapter 2  Installation Package Contents The package contains the following: y Digital Video Recorde

User’s Manual 4 Audio In/Out Your DVR can record audio from up to four sources. Connect the audio sources to Audio In 1, Audio In 2, Audio In

4- & 8-Channel Digital Video Recorder 5 Alarm Input/Output NOTE: To make connections on the Alarm Connector Strip, press and hold the butto

User’s Manual 6 Connector Pin Outs: Master Unit Slave Unit RX  To  TXD TX  To  RXD GND  To  GND NOTE: Refer t

4- & 8-Channel Digital Video Recorder 7Chapter 3  Configuration NOTE: Your DVR should be completely installed before proceeding. Refer to Ch

User’s Manual 8 HDD LED The HDD LED flickers when the DVR is recording or searching video on the hard disk drive. Alarm LED The Alarm LED is lit

4- & 8-Channel Digital Video Recorder 9 In the live monitoring mode, pressing and holding the PTZ/ZOOM button for three seconds or longer enters

User’s Manual 10 Remote Control Buttons ID Button Camera Buttons Sequence Button Freeze Button Arrow Buttons Menu Button Playback Buttons

4- & 8-Channel Digital Video Recorder 11 Arrow Buttons These buttons are used to navigate through menus and GUI. You can also use them to chan

User’s Manual 12 PTZ Button Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras. E

4- & 8-Channel Digital Video Recorder 13 Press the MENU button or move the mouse pointer to the top of the screen and then select (Login) in t

User’s Manual 14 Special characters can be created using ^ and a capital letter; e.g. ^J for NL (New Line), ^M for CR (Carriage Return). Special c

4- & 8-Channel Digital Video Recorder 15 Highlight the box beside Language and press button. A drop-down menu displays the available language

User’s Manual 16 To export the system log information, connect the USB device to the DVR. Highlight Export… and press the button. Highlight the

4- & 8-Channel Digital Video Recorder 17 Highlight the first box beside Time and press the button. The individual sections of the time will h

User’s Manual 18 Highlight the box beside Interval and press the button. Set the time interval for synchronization from 30 minutes to 1 day at va

4- & 8-Channel Digital Video Recorder 19 The Temperature column displays the temperature of the storage device. y Good – The temperature does

User’s Manual 20 Highlighting a Group Name and pressing the button allows you to change the authority levels assigned to the group. CAUTION: Wri

4- & 8-Channel Digital Video Recorder 21 y Covert Camera Setup – The user can establish all Covert Camera settings on a local system or a PC ru

4- & 8- Channel Digital Video Recorder i WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO

User’s Manual 22 Figure 17  Quick Setup Wizard screen. If you selected the Quick wizard, selecting the Next button starts the Quick Setup Wizard.

4- & 8-Channel Digital Video Recorder 23 NOTE: The recording resolution will be set to Very High when selecting High Video Quality Priority Pro

User’s Manual 24 LAN Setup Select between Auto Configuration and Manual Configuration for network configuration, and then select the Test button to

4- & 8-Channel Digital Video Recorder 25 Shutdown Highlight Shutdown in the System menu and press the button. The Shutdown screen displays a

User’s Manual 26 NOTE: Depending on network conditions, audio might be interrupted or out of synchronization during transmission. NOTE: Recorded

4- & 8-Channel Digital Video Recorder 27 NOTE: For the UPnP service to work, the NAT device should support the UPnP Port Forwarding function an

User’s Manual 28 NOTE: Entering the ID and Password and highlighting OK reads the current IP address of the DVR configured by the ADSL network. NO

4- & 8-Channel Digital Video Recorder 29 Highlight the RTSP tab, and the RTSP setup screen displays. Figure 24  RTSP setup screen. Highlight

User’s Manual 30 Notification The DVR can be set up to send an email or to contact a computer running RAS (Remote Administration System) when an e

4- & 8-Channel Digital Video Recorder 31 NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

User’s Manual iiImportant Safeguards 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated.

User’s Manual 32 NOTE: A user who does not have Covert Camera View authority cannot view video from cameras set to Covert 1 or Covert 2 in both th

4- & 8-Channel Digital Video Recorder 33 Audio Highlight Audio in the Devices menu and press the button. The Audio setup screen appears.

User’s Manual 34 The Range box allows you to set the time that the alarm schedule will be active in 15-minute increments from 00:00 to 24:00. The

4- & 8-Channel Digital Video Recorder 35 y Screen Group – The number of screen group displays when the DVR is not in the 3x3 and 1+7 modes of t

User’s Manual 36 NOTE: Sequence cannot be used in the 3x3 and 1+7 modes of the 8-channel DVR, and 2x2 mode of the 4-channel DVR. You can adjust th

4- & 8-Channel Digital Video Recorder 37 Recording Setup Figure 38  Record menu. Record Highlight Record in the Record menu and press the

User’s Manual 38 Highlight the box beside Auto Deletion, and use the Left and Right arrow buttons to adjust the length of time recorded data will be

4- & 8-Channel Digital Video Recorder 39 < Simple Mode > < Advanced Mode > Figure 41  Schedule setup screen. You can program

User’s Manual 40 When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the icon displays. The DVR follows the E

4- & 8-Channel Digital Video Recorder 41 Pre-Event Highlight Pre-Event in the Record menu and press the button, and the Pre-Event setup scree

4- & 8- Channel Digital Video Recorder iiiTable of Contents Chapter 1  Introduction ...

User’s Manual 42 You can set up the DVR to start panic recording whenever it senses an input on one of its alarm input connectors. Highlight the b

4- & 8-Channel Digital Video Recorder 43 Highlight the desired box under the PTZ heading, and press the button. A list of PTZ presets appear

User’s Manual 44 Press the button to display the menu screen. The menu on the setup screen has the following functions: Turning Zone View On

4- & 8-Channel Digital Video Recorder 45 Highlight the box under the Record heading and press the button. A list of cameras appears. You ca

User’s Manual 46 Highlight the Actions tab, and the Video Loss Actions setup screen appears. NOTE: For the Record action, the camera you selec

4- & 8-Channel Digital Video Recorder 47 Video Blind Highlight Video Blind in the Event menu and press the button. The Video Blind setup scr

User’s Manual 48 NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen

4- & 8-Channel Digital Video Recorder 49 NOTE: The following description is for a Generic Text Device. The screen changes for different types

User’s Manual 50 NOTE: For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Sc

4- & 8-Channel Digital Video Recorder 51 Highlighting the box under the Interval heading beside each alarm-in and pressing the button allows

User’s Manual iv Back Up Button ... 12Calendar Butto

User’s Manual 52 Highlight the second box beside Disk S.M.A.R.T., and press the button. Select either ºC (Celsius) or ºF (Fahrenheit), and press t

4- & 8-Channel Digital Video Recorder 53 Check Alarm-In and Check Recording will be highlighted when each event is detected based on the settin

User’s Manual 54

4- & 8-Channel Digital Video Recorder 55Chapter 4  Operation NOTE: This chapter assumes your DVR has been installed and configured. If it ha

User’s Manual 56 Live Monitoring Menu Freeze Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until yo

4- & 8-Channel Digital Video Recorder 57 NOTE: Any image adjustments you make will be applied to both the live video on the monitors and the re

User’s Manual 58 In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera number to

4- & 8-Channel Digital Video Recorder 59 PTZ Mode If a user who has PTZ Control authority logs into the system, the user can control PTZ camera

User’s Manual 60 Clicking on the left side exits the toolbar. If you want to display the toolbar again, position the mouse pointer at the bottom

4- & 8-Channel Digital Video Recorder 61 NOTE: In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large sc

4- & 8- Channel Digital Video Recorder v Playing Recorded Video ...

User’s Manual 62 Although you will be able to record without changing the unit from its original factory settings, you will want to take advantages

4- & 8-Channel Digital Video Recorder 63 Go to the previous image Play/Pause Go to the next image Fast backward play Fast forward

User’s Manual 64 Move the cursor over the date and time and press the (Play/Pause) button. You can use the Left and Right arrow buttons to highli

4- & 8-Channel Digital Video Recorder 65 Alarm Selecting (Alarm) in the Search menu resets the DVR’s outputs including the internal buzzer du

User’s Manual 66 Highlight the box beside To and press the button to toggle between On and Off. When set to Off, you can enter a specific Date a

4- & 8-Channel Digital Video Recorder 67 Once you set your desired search conditions, highlight Search and press the button to display the sea

User’s Manual 68 Selecting located at the bottom displays the Search menu. y Go to: Displays the first or last recorded image, or searches by d

4- & 8-Channel Digital Video Recorder 69 Highlight the box beside To and press the button to toggle between On and Off. When set to Off, you

User’s Manual 70 Text-In Search NOTE: It is possible that no recorded image displays on the current screen. Change the screen mode to 3x3, for t

4- & 8-Channel Digital Video Recorder 71 Highlighting the + and pressing the button allows you to add a new set of search parameter. Set up th

User’s Manual vi Figure 19  Shutdown screen. ... 25

User’s Manual 72 Highlight the box beside Password and press the button. A virtual keyboard appears allowing you to enter the password for review

4- & 8-Channel Digital Video Recorder 73Appendix USB Hard Disk Drive Preparation Preparing the USB hard disk drive in Windows 2000 NOTE: Pre

User’s Manual 74 12. Right click the newly created hard disk drive icon and select “Format”. 13. In the Format Screen, select “Full” as the “Format

4- & 8-Channel Digital Video Recorder 75 Search Example II 1 2 3 4 5 6 1234567890123456789012

User’s Manual 76 Computer system requirements for using the WebGuard program are: y Operating System: Microsoft® Windows® XP x86 (32 Bit) (Service

4- & 8-Channel Digital Video Recorder 77 NOTE: When running WebGuard in the Microsoft Windows Vista or higher operating system, it is recommend

User’s Manual 78 འ Click the camera button to select the camera to be viewed. ཡ Click the to adjust the brightness, contrast, saturation and hue

4- & 8-Channel Digital Video Recorder 79 ཛ Click the to log out the WebGuard program. ཛྷ Click the to access to the web monitoring mode.

User’s Manual 80 ཥ Click the to save any video clip of recorded data as an executable file, or click the to save the current image in a bitmap o

4- & 8-Channel Digital Video Recorder 81 Error Code Notices System Upgrade Related Clip Copy Related No. Description No. Description 0 Unknown

4- & 8-Channel Digital Video Recorder 1Chapter 1  Introduction Features Your color digital video recorder (DVR) provides recording capabiliti

User’s Manual 82 Map of Screens

4- & 8-Channel Digital Video Recorder 83 Specifications VIDEO Signal Format NTSC or PAL (Auto Detect) Video Input Composite: 4 or 8 inputs, 1

User’s Manual V1.1 84 GENERAL Dimensions (W x H x D) 10.4" x 2.0" x 7.5" (265mm x 52mm x 191mm) Unit Weight 3.7 lbs. (1.7kg) Shipping